RSS only

RAILWAY SUPPORT SERVICES

Placeholder  Image
Placeholder  Image

Railway Support Services
Montpellier House
Montpellier Drive
Cheltenham, Glos
GL50 1TY

info@railwaysupportservices.co.uk

Telephone: 0870 803 4651

P4200106a
Untitled

Road Rail 360 Machine


360o road rail vehicles are ideal machines for any railway location as they provide versatility for all forms of railway maintenance, from removing and replacing rails and ballast to general lifting and lineside flailing with the appropriate attachments. Railway Support Services are pleased to offer a Colmar T 4300 FS 360o road-rail machine for hire.

Powered by a 79Kw (109hp) Deutz diesel engine and constructed of strong electro-welded steel, a unique feature of the Colmar range of machines is their ability to extend the rear counterweight by 0.5m which increases the lifting capability by 20%. This also allows the machine to slew 180 degrees in tunnels due to its short tail-swing when retracted and their compact design allows them to perform any task.

The following accessories and attachments are supplied for the machine depending on your specific requirements:-

  • Rail grab;
  • Sleeper grab;
  • Clamshell bucket;
  • General lifting hooks;
  • Flail head attachment.

This provides a one-stop solution for all construction, clearance, renovation and maintenance work on railway lines - work which they were specifically designed to undertake.

As with our locomotive hire service, Railway Support Services can provide an operator for the machine, or for longer term hire we are be able to train your personnel to use the vehicle when required.

 

T4300FS TECHNICAL INFORMATION

ENGINE
Colmar3
Type...................Deutz 4-stroke diesel, direct injection
Max Power.......................78kW (106hp) at 2300 rpm
No. of cylinders.........................................................6
Cubic capacity....................................6472cm3/366in3
Cooling...................................................................Air
Air filter..................................................................Dry
Engine compartment............................Sound insulated
Engine support..................................Vibration dampers

ELECTRICAL SYSTEMS
Operating voltage ..................................................24V
Alternator ....................................................35A / 24V
Starter .................................................................4kW
Batteries.............................................2 x 110Ah / 12V
 

HYDRAULIC SYSTEM
Axial piston double pump with constant pressure regulation.
Max capacity ......................................184 + 184 L/min
Lifting circuit max pressure..........................3770.98 PSI
Maximum lift w/stablilisers...............................20,900lbs
Maximum lift at full reach.................................11,000lbs
Maximum reach.......................................................23ft
Height limit switch on hydraulic lock to limit height when working in restricted clearance sites.
 

DRIVING CAB
Steel sheet all round visibility sound insulated cab, with accident-prevention glass. Adjustable anatomic seat and steering wheel. Control board complete with engine oil pressure, fuel level, hour counter, alarm and working indicators with acoustic and visual overload indicators.
 

TRANSMISSION
Hydrostatic transmission by a variable self-regulating displacement hydraulic motor with axial pistons. Axles with epicyclic reduction gears on wheels. Rail transmission by contact between rails and tires with contact pressure register and steering hydraulic lock. Independent front and rear bogies hydraulically controlled from the cab. 3-speed gearbox with hydraulic selection from the cab:
1st gear working speed...................................2 mph
2nd gear working speed..................................7 mph
3rd gear working speed.................................15 mph
Service and emergency brakes controlled hydraulically by pedal with split circuit on the 4 wheels. Parking brake controlled hydraulically by a lever in the cab. Block braking on rail wheels.
 

ACCESSORIES
Hydraulic rotor 360o with following accessories available:

  • Rail grab;
  • Sleeper grab;
  • Clamshell bucket;
  • General lifting hooks;
  • Flail head attachment.
     

FUEL AND OIL CAPACITIES
Fuel tank capacity.........................................34.34 gal
Diesel engine oil..............................................3.96 gal
Hydraulic oil circuit capacity ..........................89.82 gal


WEIGHT
Working machine weight........................44092lb / 20T

 

Colmar1 Colmar2
Brush Box small Colmar4
Colmar T4300FS

If you would like more information on our 360 road rail machine or to discuss your specific requirements, please call us on 07794 480410 or e-mail roadrail@railwaysupportservices.co.uk